RV motorcycle lift. The CruiserLift motorcycle RV lift and carrier is the perfect solution for hauling your bike on your motor home or RV. This amazing motorcycle hauling device also allows you to flat tow up to 5000 lbs behind the carrier.

The CruiserLift RV motorcycle lift system offers you the ultimate in freedom by easily transporting your motorcycle with your RV on all your adventures. This is the best engineered RV Motorcycle Lift System on the market today. The motorcycle tray has a ground clearance of 40" to allow the tow vehicle to motor coach distance to be as short as possible. This distance also keeps the motorcycle out of most road debris while traveling with and RV or motor home as well as keeping the tray from bottoming out on the road while maneuvering steep road or driveway transitions. The Cruiserlift System can be fully assembled and disassembled by one individual in approximately 10 minutes. This RV motorcycle carrier is the only system available with a road dampening shock system. The system has a weight carrying capacity of 1000 pounds. You have the ability to flat tow a 6000 pound vehicle when using the Cruiser lift motorcycle RV lift System. The Cruiserlift System is the perfect compliment to your RV when carrying your recreational vehicle toys. The Cruiserlift System may appear structurally overbuilt to some. It was designed and engineered for long lasting appearance and durability. The integrity of the system is backed up by our Product Liability Insurance policy. If a product does not have Product Liability Insurance...RUN! For additional information and technical specifications, click here. For frequently asked questions on this RV motorcycle lift click here. If there is a question as to compatibility, the linked Added Weight Distribution Form will help you calculate the additional weight that will be added to the rear of your coach.

Click Pictures below to enlarge

Cruiser Lift Motorcycle transport system includes:

• Integrated Lighting System wired for coach plug
• Heavy Duty Oversized Winch Cable
• 10 Available Tie-Down Positions
• High Strength GR8 or Better Bolts & Pins
• Shortest Tow Vehicle to Coach Distance
• Kick Stand Tray
• Baked on Powder Coat Finish
• One Piece Motorcycle Tray
• Flat Tow a 6000 Pound Vehicle
• 2000 Pound Winch Capacity
• 1000 Pound Motorcycle Capacity
• Engineering Load and Stress Analysis
• 40” Motorcycle Tray Height when Loaded
• Waterproof Remote Electric Winch Switch
• Tow Bar Extension

Find a trailer hitch for your vehicle with the Hitch Selector!

The CruiserLift RV motorcycle lift features & benefits 1) ONE PERSON ASSEMBLY & DISMANTLING:

• One individual can assemble and disassemble the CruiserLift system to and from the motor home or RV.
• No tools required in either operation

2) STANDARD TOW BAR (ONLY 18 POUNDS):

• The tow bar is not structurally associated with the lifting mechanism, so there are no unwanted stresses applied to the motorcycle carrier while towing a vehicle.
• Allows for the shortest distance between the motor coach and towed vehicle.
• Maximum tongue weight is 75 lbs.

3) KICK STAND TRAY:

• Standard feature with the CruiserLift and allows the user the freedom of loading the motorcycle onto the lift, setting the kick stand plate and leaving the motorcycle in place without having someone else hold the bike while the tie downs are set.

4) REMOTE WATERPROOF ELECTRIC WINCH SWITCH BOX:

• Supplied 15 feet of winch to switch cable supplied

5) HEAVY DUTY (OVERSIZED) WINCH CABLE:

• 3/16-7 x 19 solid core galvanized wire rope

6) 2000 POUND CAPACITY WINCH:

• Increased to 6000 lbs with double pulley

7) ADJUSTABLE REMOVABLE TIE DOWN POINTS:

• Rear inside & outside tie down pints are removable for system access

8) INTEGRATED LIGHTING:

• All lights are permanently attached to the motorcycle lift system
• No need to disconnect the wiring harness from the motor home to operate the motorcycle lift system.
• Large 8" lights for optimal visibility
• Includes towed vehicle 6-way receiver

9) SHORTEST TOW VEHICLE LENGTH TO COACH IN THE INDUSTRY:
10) HIGH STRENGTH (GRADE 8 OR BETTER) BOLTS & PINS:
11) 1000 POUND MOTORCYCLE CAPACITY:

• Design accommodates all standard motorcycles on the market

12) ONE PIECE MOTORCYCLE TRAY:
13) BAKED ON POWDER COAT FINISH:

• Rust resistant non-skid coating with truck bed spray on liner.

14) FLAT TOW 5000 POUNDS:
15)PRODUCT LIABILITY INSURANCE:
16)MEETS “DOT” STANDARDS FOR G-FORCE LOAD:
17)ENGINEERING LOAD & STRESS ANALYSIS:
18)OPTIONAL RUBBERIZED COATING ON MOTORCYCLE TRAY:

• Truck bed spray on textured liner reduces the chances of scratching paint & developing rust.

19) GAS CHARGED HEAVY DUTY SHOCK:

• Reduces bouncing effect and vibration of the system while traveling on rough roads.

20) MOTORCYCLE HEIGHT IN ELEVATED POSITION = 40”:

• 40" height from ground to tray in highest position
• Reduces the amount of road spray and debris coming in contact with the motorcycle
• Reduces the tow-vehicle to coach distance
• Other systems have a height of only 27 inches