The Cruiser ramp powered motorcycle ramp is designed for flawless one man loading and unloading of a motorcycle from your pick up truck bed. This electric winch powered ramp system allows you to load and unload your full size Harley Davidson or other cruiser with the push of a button!

The Cruiser Ramp fully powered motorcycle loading ramp system offers effortless, safe loading and unloading of a full size motorcycle with one person by simply pressing a button on the attached remote control. The Cruiser Ramp Motorcycle Pickup Bed Loader was designed to be a cost effective way to load and transport a full size motorcycle in the bed of a pickup truck. The Cruiser Ramp system will accommodate all full size pickups. Simply drive the motorcycles front wheel into the locking wheel chock on the system platform assembly, tie the front wheel down at the axle position using the supplied ratchet tie-down straps, activate the hand held remote switch and the motorcycle is pulled into the pickup bed. The motorcycle pickup loader is powered by a 3000 pound capacity electric winch with 3/16" wire rope heavy duty cable. The Cruiser Ramp system will accommodate the standard 5'-6", 6'-6", and 8' bed lengths with 40" - 42" clearance between the wheel wells which includes step side model pickups. The Cruiser Ramp system allows for the tailgate of the pickup to be closed with the motorcycle removed on the 5'-6" and 6'-6" models. The tailgate may also be closed with the 8' bed model with the motorcycle loaded or removed from the bed. The motorcycle may be loaded into a 8' bed with or without the tailgate attached. The system is easy to install and dismantle. The Cruiser Ramp mechanism removes the motorcycle from the bed without having to pull the motorcycle out by hand. This is done without using multiple winches and complicated electronic switching. The ramps store within their own holders along the side of the pickup bed. The holders just drop into the stake bed holes within the pickup bed rail. They may be trimmed in order to lower the ramps as far as possible within the bed.

Click the pictures below to enlarge

STANDARD FEATURES INCLUDE:

• The Cruiser Ramp system is shipped fully assembled, ready for installation into the pick up truck bed and is easily installed and removed.
• Easy installation and removal from the pick up truck bed
• The Cruiser ramp is compatible with all full size pick up truck beds with 5'-5", 6'-6", and 8' in length and at least 40" - 42" width between the wheel wells.
• The Cruiser Ramp system allows you to close the tailgate with the system installed and the bike removed. You do not have to remove the system on any bed length truck to remove the tailgate.
• With 8' bed lengths, the tailgate may be closed with the bike loaded. This depends on the motorcycle dimensions.
• The motorcycle may be loaded with or without the tailgate installed when loading into an 8 foot truck bed.
• The Cruiser Ramp has a unique removal system for the motorcycle. As the motorcycle is loaded, springs are placed under tension. when the winch is activated to remove the motorcycle, the springs will pull the motorcycle out of the bed. Once the rear tire drops past the tailgate, gravity takes over and the motorcycle is removed without having to pull it out of the bed.
• Operates with a 3000 lb. electric winch with 3/16" wire rope cable
• Remote switch with 15 feet of cable allows you to stand by and observe the motorcycle while loading and unloading.
• Includes safety chains
• The rear tire loading ramp has a 1500 lb. capacity
• Black semi-gloss powder coat provides a long lasting look and may be touched up if scratched.
• Self-locking motorcycle wheel chock for the front tire includes two ratchet tie down straps for the front axle.

Not sure what ramp length you need? Find out with the ramp calculator!

High Quality Heavy Duty Tie Down Kits- DON'T USE CHEAP STRAPS TO TIE DOWN A $20,000 BIKE

8 Piece Motorcycle Tie Down Kit Click Pic to enlarge	8 piece kit includes: 2 heavy duty 1" wide x 6' foot long ratchet straps w/1200 lb. capacity. 2 heavy duty 1" wide x 6' long cam buckle straps w/1200 lb. capacity. 4 soft loops to prevent scratching your cycle w/2500 lb. capacity. All straps in black. (Click here for more info on this strap package)	$29.99 +8 s&h
Heavy Duty Motorcycle Tie Down Kit Click pic to enlarge	8 piece kit includes: 2 super heavy duty 2" wide x 5.5' foot long ratchet straps w/2500 lb. capacity. 2 super heavy duty 2" wide x 5.5' long cam buckle straps w/2500 lb. capacity. 4 soft loops to prevent scratching your cycle w/2500 lb. capacity. All straps in black. (Click here for more info on this strap package)	$39.99 +8s&h
Advanced Motorcycle Tie Down Kit Click pic to enlarge	Advanced kit includes: 2 heavy duty 1" wide x 6' foot long ratchet straps w/1200 lb. capacity. 2 heavy duty 1" wide x 6' long cam buckle straps w/1200 lb. capacity. 4 soft loops to prevent scratching your cycle w/2500 lb. capacity, 2 sleeve protectors to protect your paint, 4 stud rings with backing plates and mounting hardware (Click here for more info on this strap package)	$89.99 +10 s&h