The Black Widow™ light weight, heavy duty aluminum folding motorcycle ramp system comes in 94 inch long or 108 inch long versions and are a full 40 inches wide so you can put your feet down when riding the bike up, and most importantly, when
backing the bike out of the truck down the ramp. Simply pull in the clutch, grab your brake, put down your feet and take your time going backwards down the ramp. The ultimate in safety! Your best choice for big bikes or other 4 wheeled vehicles.
Click on the pictures below to enlarge
| These ramps come in 3 separate folding sections that fold to half their length so they will fit in a short bed truck or even your cab. They can be bolted all together for added strength when loading heavier bikes or can be used as 3 separate sections for loading other 4 wheeled vehicles that are wider than 40 inches. The ramp has a 1500 lb. capacity for loading almost any bike! |
Click to enlarge
 |
The two 11 inch wide side sections are separate components and work great as a pair of dual ATV Ramps for loading ATV's, garden tractors, and lawn mowers with a 1200 lb capacity! Add your center section and have a HUGE 40 inch wide deck to put down your feet and ride your motorcycle up or back down in a controlled and safe manner. All these high quality ramps are arched for additional clearance and include 3 safety straps (safety straps should be used whenever loading to prevent ramp movement). With a 94"(7' 10") long and a 108"(9') long models available, now you can load almost any truck and motorcycle combination!
Bolting ramps together is required for bikes over 750 lbs.
|
Click to enlarge
 |
**Special Notice: We have taken the Black Widow ramps to the next level making them even stronger than before. Our heavy duty model (HD) now features a 4 structural beam design on the 17-1/4" wide ramps making the ramp even stronger than the 3 beam design.
We have also increase the diameter of the traction rungs to 5/8" vs the 1/2" rungs used in the past. The 5/8" rungs eliminate the rungs bending when loading heavy motorcycles. Please take a look at the 4-Beam and 3-Beam comparison to see the difference between the old and new models. Please make sure you compare these new features with our competition when shopping for new ramps.
- Fold to half their length for easy storage and transport
- Ramps can connect together for added strength for loading heavier bikes
- Heavy duty solid plate style attaching lip is much stronger than the finger style ramps
- Lightweight all aluminum design
- Designed to walk up or ride bike up and down
- 1500 lb. total capacity
- Arched design to increase clearance
- 3 Safety Straps prevent ramp kick out for safety
- Skid resistant serrated rung design prevents wheel slippage
- NOT Recommended for loading Trikes
- 5 Year Warranty
- Instructions (.pdf)
Not sure what ramp length you need? Find out with the ramp calculator!
40 inch wide 1 piece or 3 piece ramps for safely loading motorcycles!!
This introductory special price is only in effect while supplies last, Only a limited number of these motorcycle ramps are in stock so order now to get your Black Widow today!
| Item # |
Unfolded Length |
Folded Length (approximate) |
Support Beams |
Weight |
Width |
Weight Capacity |
Price |
| BW-9440-HD - Folding Arched Motorcycle/ATV Ramp with a New 4 Beam Heavy Duty Design |
94.5 inches
(7' 10") |
48.5 inches |
4 beams |
Center section= 43 lbs
Side section=19 lbs each |
40 inches (total)
(1) 17.25" center Section
(2) 11.25" side sections |
1500 lbs total |
+50 s&h
|
| BW-10840-HD - Folding Arched Motorcycle/ATV Ramp with a New 4 Beam Heavy Duty Design |
108 inches
(9 foot) |
54.5 inches |
4 beams |
Center section= 47 lbs
Side section=21 lbs each |
40 inches (total)
(1) 17.25" center Section
(2) 11.25" side sections |
1500 lbs total |
+55 s&h
|
| Click Here to see our Longer 120" and 144" Long Black Widow Motorcycle Ramps |
DON'T USE CHEAP STRAPS TO TIE DOWN A $20,000 BIKE
|
High Quality Heavy Duty Tie Down Kits | |
4 Piece Cam Buckle Motorcycle Tie Down Kit
Click picture to enlarge |
4 piece kit includes: 4 cam buckle straps with built in soft loops. All straps are 1" wide x 7' long nylon straps with vinyl coated snap hooks and a 1200 lb. capacity. Black with red embroidered Black Widow logo. Made in the USA. (Click here for more info on this strap package) |
+8 s&h
|
8 Piece Motorcycle Tie Down Kit
Click picture to enlarge |
8 piece kit includes: 2 heavy duty 1" wide x 6' foot long ratchet straps w/1200 lb. capacity. 2 heavy duty 1" wide x 6' long cam buckle straps w/1200 lb. capacity. 4 soft loops to prevent scratching your cycle w/2500 lb. capacity. All straps in black.(Click here for more info on this strap package) |
$29.99 +8 s&h
|
Heavy Duty Motorcycle Tie Down Kit
Click picture to enlarge |
8 piece kit includes: 2 super heavy duty 2" wide x 6' foot long ratchet straps w/2500 lb. capacity. 2 super heavy duty 2" wide x 6' long cam buckle straps w/2500 lb. capacity. 4 soft loops to prevent scratching your cycle w/2500 lb. capacity. All straps in black. (Click here for more info on this strap package) |
$39.99 +8 s&h
|
Snap Hook Motorcycle Tie Down Kit
click picture to enlarge |
8 piece kit includes: 2 super heavy duty 2" wide x 6' foot long Snap hook ratchet straps w/2500 lb. capacity. 2 super heavy duty 2" wide x 6' long cam buckle snap hook straps w/2500 lb. capacity. 4 soft loops to prevent scratching your cycle w/2500 lb. capacity. All straps in black.
Click here for more info on snap hook straps |
+8 s&h
|
Advanced Motorcycle Tie Down Kit
Click picture to enlarge |
Advanced kit includes: 2 heavy duty 1" wide x 6' foot long ratchet straps w/1200 lb. capacity. 2 heavy duty 1" wide x 6' long cam buckle straps w/1200 lb. capacity. 4 soft loops to prevent scratching your cycle w/2500 lb. capacity, 2 sleeve protectors to protect your paint, 4 stud rings with backing plates and mounting hardware
(Click here for more info on this strap package) |
$89.99 +10 s&h
|
 | |
